The BM series is a complete range of vibrating motors with foot base mounting, covering most of applications needs on vibrating equipments in the different industrial sectors.
All the BM range is manufactured in conformity to the EEC Directives in force (Safety of Machines 2006/42/CE; Low Tension 2006/95/CE, Electromagnetic Compatibility 2004/108/CE), and it is available conform to ATEX 94/9/CE, in execution Ex II 3D tD A22 IP65 for zone Dust-22 and 3G EEx nA II T3 for zone Gas-2.
Three-phase Input Voltage:
Standard executions 50Hz 220-230/380-400V; 60Hz 220-240/440-480V
(for sizes 150 and 200 standard execution 50Hz- 380-400/660-690V; 60Hz 440-480/760-830V)
Special input voltages available on request.
BM series vibrating motors are suitable for use with Variable Frequency Drive (VFD-Inverter).
|Standard:||2 poles: 3000 rpm – 50Hz||3600 rpm – 60Hz|
|4 poles: 1500 rpm – 50Hz||1800 rpm – 60Hz|
|6 poles: 1000 rpm – 50Hz||1200 rpm – 60Hz|
|8 poles: 750 rpm – 50Hz||900 rpm – 60Hz|
|On request:||10 poles: 600 rpm – 50Hz||720 rpm – 60Hz|
|12 poles: 500 rpm – 50Hz||600 rpm – 60Hz|
Continuous duty at the maximum centrifugal force (S1), with the possibility to adjust the force from 0 to 100% following the specific graded plate on the eccentric weights.
Mechanical Protection-Impacts Protection
Electric motor realized with low loss silicium magnetic lamination core, allowing to increase the efficiency while reducing heating up.
F standard, H on request.
Windings impregnation realized with ASTM system, with polyester resin class H.
From -20°C to +40°C (-4°F/104°F).
lectric motor protected by thermistor (PTC set at 130°C) as standard from size 50 (available on request on smaller sizes).
Shafts in NiCrMo steel, heat treated.
Mechanical structure designed to withstand the high stresses, realized in cast iron (starting from size 03) or in high resistance aluminum (up to size 02)
Electrostatic powder painting, epoxy-polyester, polymerized in oven. Color: Blue RAL 5010
Bearings and Lubrication
High load capacity bearings, in special executions to withstand the stresses of high centrifugal forces and vibrations, with special “Long-Life” grease lubrication. Labyrinth type bearing seal for grease, with wide restraining chamber.
Available on request
Stainless steel weight covers
Special fixing holes configurations